PDA

View Full Version : 3gs trazi aktivacionu karticu



Bart_Simpson
12-03-2012, 22:22
pozdrav,konacno i ja dobio 3gs,medjutim nikako da dobijem neki koji odmah mogu koristiti,pa bih zatrazio pomoc od vas
ovako kad upalim telefon,mogu samo emergency call,a kad ga nakacim na itunes,kaze mi da ubacim activacionu karticu.kroz trenutni meni mogu da se nakacim na wifi..
ne znam koji je ios na njemu,bb,jedino znam da mi je poslat od preko,i kaze sestra da mi je updatovala sistem,i da ga uzdravlje koristim :)
da li mogu i kako da ga jb i unlockujem??
3gs 16gb,model je A1303

Chuckie
12-03-2012, 22:28
Eh ako ga je sestra updatovala vjerovatno je digla i bb.

Bart_Simpson
12-03-2012, 22:29
pa nije bitno,gps mi ne treba,samo nek radi

edit:nakacio na itools pise sledece
jailbreaked.NO
region Swiss
serial number week 33,08|2009
ios version 5.1

dado
12-03-2012, 22:33
Ako ga je update-ovala na 5.1, bojim se da si zaglavljen do daljnjeg. Osim ako imaš sačuvane shsh fajlove za neki niži ios pa da probaš downgrade pa jailbreak sa 06.15. bb.

Bart_Simpson
12-03-2012, 22:34
nassao bb version 5.16.05.kako da vidim jel ima te shsh sacuvane

Chuckie
12-03-2012, 22:35
Instaliraj iFaith i klikni dump shsh.

zlatkokrunic
12-03-2012, 22:38
Mozes opusteno ici na iOs 4.1.
Ne trebaju ti shsh bloods...
Apple i dalje potpisuje 4.1 za 3gsa...

Bart_Simpson
12-03-2012, 22:39
pise samo da je do verzije 5.0.1

zlatko..a kako to da uradim,jer moram da dizem bb?trebam custom da pravim..sta vec?

zlatkokrunic
12-03-2012, 22:45
Skines iOs 4.1
Odradis shift+restore u iTunesu.
( host fajl moras vratiti na pocetno stanje, znaci u host fajlu izbrises one zadnje redove u kojima pise Apple)

I posle odradis JB pomocu redsn0w-a.

I onda nam procitas 3,4 i 5 cifru serijskog broja i trenutni bb...pa onda da vidimo da li da radis dizanje bb na 6.15...

Ako ti prijavi neku gresku prilikom restora ...javljaj..

Bart_Simpson
12-03-2012, 22:49
da bi uradio ovo shift+restore da ga ubacim u dfu mode preko ireba?
preko kog redsnow-a da radim jb?

zlatkokrunic
12-03-2012, 22:54
Mozes pomocu redsn0w 0.9.6b2

I mozes ga ubaciti u dfu mode pre restorea, ja obicno to radim sa redsnowom a mozes i sa iRebom... Mada mislim da bi trebao proci i bez dfu moda..

Bart_Simpson
12-03-2012, 22:57
kad ga nakacim na itunes sasmo pise da ugacim aktivacionu karticu,nema nigde restore da pise

zlatkokrunic
12-03-2012, 22:58
E pa da...izvini....
Onda moras ga ubaciti u dfu mode,..

Bart_Simpson
12-03-2012, 23:09
znaci prvo uradim shift+restore sa oficijalnim 4.1,a kasnije preko redsnow isto sa oficijalnim 4.1.
a kad mi kaze sta da stikliram u redsnow?

zlatkokrunic
12-03-2012, 23:14
Da,
Posle u redsnow ubacujes ificijalni 4.1 i samo otkacis Install Cydia...

Bart_Simpson
12-03-2012, 23:19
kod prve stavke dosao do kraja i izbacio mi 1015 error,sad mi se upalio tel,i stala ona slika itunesa i usb kabla.e jebemu sunce :( . sta sad?

zlatkokrunic
12-03-2012, 23:27
Opusteno...samo se nemoj nervirati. ..sredicemo sve to...

Jesi li vratio host fajl kako je i bio? Obrisao si zadnje redove u kojima pise apple?
I obrisi fajl host.umbrella u tom istom direktorijumu...

Bart_Simpson
12-03-2012, 23:32
nema apple nigde da pise u tom folderu

ovo mi stoji u hosts

# Copyright (c) 1993-2009 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host


# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost

a imam i lmhosts tu ima ovo

# Copyright (c) 1993-1999 Microsoft Corp.
#
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:<domain>
# #INCLUDE <filename>
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmans erver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
# 102.54.94.102 "appname \0x14" #special app server
# 102.54.94.123 popular #PRE #source server
# 102.54.94.117 localsrv #PRE #needed for the include
#
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.

drugari jel ima neko raspolozan da pomogne?
da probam mozda sa custom 4.1 da uradim restore?
da li bi to resilo ovu gresku?
citam po netu da moze tako da se resi greska,al prvo da vidim sta mi vi kazete?

zlatkokrunic
13-03-2012, 10:47
http://ih8sn0w.com/
(http://ih8sn0w.com/)

evo ovde skini iReb...pokreni ga i u njemu imas da kliknes na "recovery Mode Loop Fixer" i onda kliknes na Fixses error 1015....
Valjda ce ti ovo pomoci!

Pa onda posle toga da probas restore na 4.1...
mozes i custom i obicni restore svejedno je...

Bart_Simpson
13-03-2012, 12:45
sve zavrsio,hvala legendo.znaci uradio sam jb sa 4.1,sad telefon sljaka ko lud.ne trazi karticu..
e sad jos unlock

ihpone 3gs 16gb
version 4.1
serial (3,4,5) 933
model mc131fd
modem firmware 05.16.05

zlatkokrunic
13-03-2012, 13:13
odlicno!!!
e sada vidis kakva je situacija moras ici na ipad baseband, na 6.15

Pokrenes redsnow taj sto si sa njim i odradio JB, pratis upustvo i odradis
Install Cydia
i instal ipad baseband.

kada se sve to zavrsi onda pokrenes cydia na iphoneu i instaliras ultrasnow da bi otkljucao 6.15 baseband.

Bart_Simpson
13-03-2012, 13:21
znaci opet idem redsnow,ucitam oficijaolni 4.1,stikliram ipad bb i cydia i to je to...
necu sprziti taj bb chip ili sta vec?
edit:nema druze da se stiklira ipad baseband,nema je ta opcija u redsnow

Chuckie
13-03-2012, 13:40
Ima, klikni Jailbreak, ubaci tel u dfu, i onda ces dobiti meni u kojem iznacis Install Cydia i Install iPad bb.


Sent via iPhone / ttalk

Bart_Simpson
13-03-2012, 13:47
ne razumem,kad upalim redsnow,odaberem oficijalni,idem next,i odma imam ono da stikliram cydiu..al nema ipad bb

Chuckie
13-03-2012, 13:52
Nemas sta birati. Skini najnoviju verziju Redsnowa i na start ekranu imas opciju Jailbreak.


Sent via iPhone / ttalk

Bart_Simpson
13-03-2012, 14:07
sta bi ovo,uradio to,izbubi mi se redsnow,i stoji onako upaljen ekran,nista se ne desava???
samo crn ekran stoji
sta sad da radim?
stoji mi ovako ekran vec 5 min,i nista se ne dessava,ispisuje..
ljudi jel sam zeznuo nesto??evo 10 min,i nista se ne desava?
evo upalio se,al mi je isti bb,sve sto sam instalirao stoji tu..sve isto

sta da radim??
probao opet,opet isto.kad me pita za baseband ja idem na yes,pa opet na yes,onda krene,napise mi da budem strpljiv,stoji malo tako,i ugasi se redsnow

bvucetic
13-03-2012, 14:48
E ovako, tut za tebe :

Uradi custom update na iOS 5.1
Skini sn0wbreeze sa ih8sn0w.com
Skini 5.1 sa felixbruns.de
U sn0wbreezu izaberes IPSW ides Expert Mode i stikliras Activate the iPhone [Hacktivate] ides next kod Unlocks stikliras Install 06.15.00 iPad Baseband ides dalje stisnes Build IPSW i next, udjes u Pwned DFU i upgradujes.
E sad uzmi ultrasn0w fixer za 5.1 i ultrasn0w i uzivaj :)

Bart_Simpson
13-03-2012, 14:51
jel mi treba za to sacuvani fajlovi?
ultrasn0w fixer za 5.1 i ultrasn0w ovo kasnije iz cydie da skinem?

mogu li snowbreeze 2.9.2 da skinem,nece ovaj da se skine,ili 2.9.1

bvucetic
13-03-2012, 15:06
2.9.2 moras
nikako 2.9.1 on ne podrzava 5.1
ne trebaju ti fajlovi
ultrasn0w skines iz cydie
a za fixer dodas repo
repo.iparelhos.com

bvucetic
13-03-2012, 15:10
ako bas bude trebalo, pravim ti custom IPSW i uploadujem :P

EDIT : hahahahahahahahahhaahahahahahhaah, meni sn0wbreeze za iPhone 4 pokazao install 06.15 iPad bb :O
necu da brickujem fon :P

Chuckie
13-03-2012, 15:32
Ne radi Ultrasnow na 5.1


Sent via iPhone / ttalk

Bart_Simpson
13-03-2012, 15:45
EVO KONACNO I JA DA IMAM IPHONE.resio problem,do redsnowa je bilo.sad je sve ok,pun signal...
HVALA SVIMA NA POMOCI,,ko ima u buduce kao moj problem,rado cu mu pomoci. Jos jednom svima hvala drugari,ZLATKO,car si majke mi